[600MRG] EIRP and FCC?

[Jim Miller]

Thanks for all the feedback. My antenna will most likely be my inverted L
currently in use for 160. I'll probably just add a big loading coil at the
base. It is 67x67ft and is all I can do on my smallish lot.

My radial field isn't the best either but I try to add more when I have
time and wire.

If anyone has approximate dimensions for a loading coil I'd appreciate a
link.

Thanks!

Jim ab3cv

On Sun, Jan 25, 2015 at 11:17 PM, Merv Schweigert <k9fd at flex.com> wrote:

> On 1/25/2015 4:51 PM, Edward R Cole wrote:
>
>> .  That is my long-range plan converting from 10.470 to 470-KHz and using
>> a K3 as IF in TEST mode with 1mw output on 10.472-10.478 MHz.
>>
>> My current station uses the K3 directly at 495-510 KHz driving a 100w
>> beacon transmitter.
>>
>> Antenna still down.  Now under 10-inches of snow and +3F temps.
>>
>> 73, Ed - KL7UW
>>
>>  If you have the KVX3 on your K3 you dont have to do any such thing with
> test mode,
> the K3 can use 10.472 as the transverter band and the RF output is
> variable down
> in the MW range out of the KVX3 out jack.
> I am doing that here driving a transverter to about 10 watts,
> 73 Merv K9FD/KH6  WH2XCR
>
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>