[600MRG] EIRP and FCC?
Jim Miller
jim at jtmiller.com
Mon Jan 26 13:49:52 CST 2015
Forgot to mention: I have a 500pf max vacuum variable from a long abandoned
project that I could use to remote tuning perhaps.
Jim ab3cv
On Mon, Jan 26, 2015 at 2:47 PM, Jim Miller <jim at jtmiller.com> wrote:
> Thanks for all the feedback. My antenna will most likely be my inverted L
> currently in use for 160. I'll probably just add a big loading coil at the
> base. It is 67x67ft and is all I can do on my smallish lot.
>
> My radial field isn't the best either but I try to add more when I have
> time and wire.
>
> If anyone has approximate dimensions for a loading coil I'd appreciate a
> link.
>
> Thanks!
>
> Jim ab3cv
>
> On Sun, Jan 25, 2015 at 11:17 PM, Merv Schweigert <k9fd at flex.com> wrote:
>
>> On 1/25/2015 4:51 PM, Edward R Cole wrote:
>>
>>> . That is my long-range plan converting from 10.470 to 470-KHz and
>>> using a K3 as IF in TEST mode with 1mw output on 10.472-10.478 MHz.
>>>
>>> My current station uses the K3 directly at 495-510 KHz driving a 100w
>>> beacon transmitter.
>>>
>>> Antenna still down. Now under 10-inches of snow and +3F temps.
>>>
>>> 73, Ed - KL7UW
>>>
>>> If you have the KVX3 on your K3 you dont have to do any such thing with
>> test mode,
>> the K3 can use 10.472 as the transverter band and the RF output is
>> variable down
>> in the MW range out of the KVX3 out jack.
>> I am doing that here driving a transverter to about 10 watts,
>> 73 Merv K9FD/KH6 WH2XCR
>>
>>
>> _______________________________________________
>> 600MRG mailing list
>> 600MRG at w7ekb.com
>> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>>
>
>
More information about the 600MRG
mailing list