[600MRG] QRV on 477.9KHz....
Brian, WA1ZMS
wa1zms at att.net
Wed Oct 30 20:13:03 CDT 2013
FWIW.....
No time for QSOs right now (sorry), but WD2XSH/31 CW beacon is always
running on 477.9KHz and QSLs are good via QRZ.com address.
I do plan to have WG2XFQ running Heising Modulation for Fessenden X-Mass Eve
event like in years past on 485.0KHz. Please spread the word. That's the
time I fire up the Hafler 9505 amp and run the full 20w ERP. hi...hi...
Sure does warm the shack up several degrees.
-Brian, WA1ZMS/4 & WD2XSH/31 in VA
-----Original Message-----
From: 600MRG [mailto:600mrg-bounces at w7ekb.com] On Behalf Of Eric NO3M
Sent: Wednesday, October 30, 2013 9:01 PM
To: 600mrg at w7ekb.com
Subject: Re: [600MRG] WG2XJM CW Beacon - 474.0
John, et.al.
OK, I should be on 474.0 kc now. Looks like the program to generate the
audio recording is taking the program argument for the audio frequency and
doubling it! I re-created the sound file with the correct offset.
Thanks again for the heads up.
73 Eric NO3M / WG2XJM
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
More information about the 600MRG
mailing list