[600MRG] QRV on 477.9KHz....

[John Andrews]

Brian,

Copyable by ear at 1020 edt. 

John, W1TAG

> On Oct 30, 2013, at 9:13 PM, "Brian, WA1ZMS" <wa1zms at att.net> wrote:
> 
> FWIW.....
> 
> No time for QSOs right now (sorry), but WD2XSH/31 CW beacon is always
> running on 477.9KHz and QSLs are good via QRZ.com address.
> 
> I do plan to have WG2XFQ running Heising Modulation for Fessenden X-Mass Eve
> event like in years past on 485.0KHz.  Please spread the word. That's the
> time I fire up the Hafler 9505 amp and run the full 20w ERP. hi...hi...
> Sure does warm the shack up several degrees.
> 
> 
> -Brian, WA1ZMS/4 & WD2XSH/31 in VA
> 
> -----Original Message-----
> From: 600MRG [mailto:600mrg-bounces at w7ekb.com] On Behalf Of Eric NO3M
> Sent: Wednesday, October 30, 2013 9:01 PM
> To: 600mrg at w7ekb.com
> Subject: Re: [600MRG] WG2XJM CW Beacon - 474.0
> 
> John, et.al.
> 
> OK, I should be on 474.0 kc now.  Looks like the program to generate the
> audio recording is taking the program argument for the audio frequency and
> doubling it!  I re-created the sound file with the correct offset.
> 
> Thanks again for the heads up.
> 
> 73 Eric NO3M / WG2XJM
> 
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
> 
> 
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com