[600MRG] WG2XJM CW Beacon
sbjohnston at aol.com
sbjohnston at aol.com
Wed Oct 30 22:17:18 CDT 2013
The WG2XJM CW beacon was 579 here in Madison, Wisconsin, at 0310Z.
Rx is an Icom IC-7200 and the antenna is my active 8 ft whip in the backyard.
Station seemed to leave the air at about 0314Z.
Steve WD8DAS
sbjohnston at aol.com
http://www.wd8das.net/
--------------------------------------------------------------------
Radio is your best entertainment value.
--------------------------------------------------------------------
-----Original Message-----
From: 600mrg-request <600mrg-request at w7ekb.com>
To: 600mrg <600mrg at w7ekb.com>
Sent: Wed, Oct 30, 2013 8:12 pm
Subject: 600MRG Digest, Vol 30, Issue 31
Send 600MRG mailing list submissions to
600mrg at w7ekb.com
To subscribe or unsubscribe via the World Wide Web, visit
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
or, via email, send a message with subject or body 'help' to
600mrg-request at w7ekb.com
You can reach the person managing the list at
600mrg-owner at w7ekb.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of 600MRG digest..."
Today's Topics:
1. WG2XJM CW Beacon (Eric NO3M)
2. Re: WG2XJM CW Beacon (John Andrews)
3. Re: WG2XJM CW Beacon (John Langridge)
4. Re: WG2XJM CW Beacon (Radio Station KW1I)
5. Re: WG2XJM CW Beacon (Eric NO3M)
6. Re: WG2XJM CW Beacon - 474.0 (Eric NO3M)
7. Re: WG2XJM CW Beacon - 474.0 (John Andrews)
8. QRV on 477.9KHz.... (Brian, WA1ZMS)
----------------------------------------------------------------------
Message: 1
Date: Wed, 30 Oct 2013 19:25:51 -0400
From: Eric NO3M <no3m at no3m.net>
To: "600mrg at w7ekb.com" <600mrg at w7ekb.com>
Subject: [600MRG] WG2XJM CW Beacon
Message-ID: <5271957F.6020603 at no3m.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
WG2XJM running CW beacon for a while this evening, QRV 474.0 kHz.
Approx. 25W ERP.
Switching to WSPR later tonight after 0300Z.
73 Eric NO3M / WG2XJM
------------------------------
Message: 2
Date: Wed, 30 Oct 2013 19:48:23 -0400
From: John Andrews <w1tag at charter.net>
To: 600mrg at w7ekb.com
Subject: Re: [600MRG] WG2XJM CW Beacon
Message-ID: <52719AC7.7020906 at charter.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Eric,
You're coming in very nicely here on 475.0 kHz (was the 474.0 a typo?).
Copying across the room...
On 10/30/2013 7:25 PM, Eric NO3M wrote:
> WG2XJM running CW beacon for a while this evening, QRV 474.0 kHz.
> Approx. 25W ERP.
>
> Switching to WSPR later tonight after 0300Z.
>
> 73 Eric NO3M / WG2XJM
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 8.5.455 / Virus Database: 271.1.1/5970 - Release Date: 07/06/13
16:46:00
>
------------------------------
Message: 3
Date: Wed, 30 Oct 2013 17:12:11 -0700 (PDT)
From: John Langridge <jlangridge at sbcglobal.net>
To: "no3m at no3m.net" <no3m at no3m.net>, "600mrg at w7ekb.com"
<600mrg at w7ekb.com>
Subject: Re: [600MRG] WG2XJM CW Beacon
Message-ID:
<1383178331.66032.YahooMailNeo at web181305.mail.ne1.yahoo.com>
Content-Type: text/plain; charset=us-ascii
hearing you in the noise pretty well in between static crashes and WSPR
transmissions.. not as good as last night but its way early...
73,
John XIQ
________________________________
From: Eric NO3M <no3m at no3m.net>
To: "600mrg at w7ekb.com" <600mrg at w7ekb.com>
Sent: Wednesday, October 30, 2013 6:25 PM
Subject: [600MRG] WG2XJM CW Beacon
WG2XJM running CW beacon for a while this evening, QRV 474.0 kHz. Approx. 25W
ERP.
Switching to WSPR later tonight after 0300Z.
73 Eric NO3M / WG2XJM
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
------------------------------
Message: 4
Date: Wed, 30 Oct 2013 20:43:22 -0400
From: "Radio Station KW1I" <kw1i at earthlink.net>
To: <no3m at no3m.net>, <600mrg at w7ekb.com>
Subject: Re: [600MRG] WG2XJM CW Beacon
Message-ID: <859B16B8E6A0431592F6AD0BD6B30D24 at HomeOffice>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
20db above the noise here in Central New Hampshire. Easy CW QSO strength.
Dale
WD2XSH/5
KW1I
-----Original Message-----
From: Eric NO3M
Sent: Wednesday, October 30, 2013 7:25 PM
To: 600mrg at w7ekb.com
Subject: [600MRG] WG2XJM CW Beacon
WG2XJM running CW beacon for a while this evening, QRV 474.0 kHz.
Approx. 25W ERP.
Switching to WSPR later tonight after 0300Z.
73 Eric NO3M / WG2XJM
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
------------------------------
Message: 5
Date: Wed, 30 Oct 2013 20:54:03 -0400
From: Eric NO3M <no3m at no3m.net>
To: 600mrg at w7ekb.com
Subject: Re: [600MRG] WG2XJM CW Beacon
Message-ID: <5271AA2B.8000801 at no3m.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
John
Thanks for advising on the freq. The rig is on 473.0 kHz USB, made an
audio recording at what should be 1000 Hz. The carrier should end up at
474 kHz. Audio recording was made with 'cwtext' in Linux. I'd rather
run keyed CW, but couln't find a ready application to beacon. Fldigi
would have been another option, but TX audio from it is not working for
some reason as yet to be detemermined. The CW audio file is just
getting played back from a shell script every 10 seconds.
73 Eric
On 10/30/2013 07:48 PM, John Andrews wrote:
> Eric,
>
> You're coming in very nicely here on 475.0 kHz (was the 474.0 a
> typo?). Copying across the room...
>
>
------------------------------
Message: 6
Date: Wed, 30 Oct 2013 21:01:19 -0400
From: Eric NO3M <no3m at no3m.net>
To: 600mrg at w7ekb.com
Subject: Re: [600MRG] WG2XJM CW Beacon - 474.0
Message-ID: <5271ABDF.3050707 at no3m.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
John, et.al.
OK, I should be on 474.0 kc now. Looks like the program to generate the
audio recording is taking the program argument for the audio frequency
and doubling it! I re-created the sound file with the correct offset.
Thanks again for the heads up.
73 Eric NO3M / WG2XJM
------------------------------
Message: 7
Date: Wed, 30 Oct 2013 21:07:04 -0400
From: John Andrews <w1tag at charter.net>
To: "no3m at no3m.net" <no3m at no3m.net>
Cc: "600mrg at w7ekb.com" <600mrg at w7ekb.com>
Subject: Re: [600MRG] WG2XJM CW Beacon - 474.0
Message-ID: <9CA004BA-FE51-4D93-A738-E0C4B88229C7 at charter.net>
Content-Type: text/plain; charset=us-ascii
Eric,
Just checked it, and you're on 474 now. Sounds great.
The digi mode terminal in Spectrum Lab does a nice CW beacon, though you have to
enter a fraction of a second for dots, rather than wpm.
John, W1TAG
> On Oct 30, 2013, at 9:01 PM, Eric NO3M <no3m at no3m.net> wrote:
>
> John, et.al.
>
> OK, I should be on 474.0 kc now. Looks like the program to generate the audio
recording is taking the program argument for the audio frequency and doubling
it! I re-created the sound file with the correct offset.
>
> Thanks again for the heads up.
>
> 73 Eric NO3M / WG2XJM
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
------------------------------
Message: 8
Date: Wed, 30 Oct 2013 21:13:03 -0400
From: "Brian, WA1ZMS" <wa1zms at att.net>
To: <600mrg at w7ekb.com>
Subject: [600MRG] QRV on 477.9KHz....
Message-ID: <009b01ced5d6$59aa6560$0cff3020$@att.net>
Content-Type: text/plain; charset="us-ascii"
FWIW.....
No time for QSOs right now (sorry), but WD2XSH/31 CW beacon is always
running on 477.9KHz and QSLs are good via QRZ.com address.
I do plan to have WG2XFQ running Heising Modulation for Fessenden X-Mass Eve
event like in years past on 485.0KHz. Please spread the word. That's the
time I fire up the Hafler 9505 amp and run the full 20w ERP. hi...hi...
Sure does warm the shack up several degrees.
-Brian, WA1ZMS/4 & WD2XSH/31 in VA
-----Original Message-----
From: 600MRG [mailto:600mrg-bounces at w7ekb.com] On Behalf Of Eric NO3M
Sent: Wednesday, October 30, 2013 9:01 PM
To: 600mrg at w7ekb.com
Subject: Re: [600MRG] WG2XJM CW Beacon - 474.0
John, et.al.
OK, I should be on 474.0 kc now. Looks like the program to generate the
audio recording is taking the program argument for the audio frequency and
doubling it! I re-created the sound file with the correct offset.
Thanks again for the heads up.
73 Eric NO3M / WG2XJM
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
------------------------------
Subject: Digest Footer
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
------------------------------
End of 600MRG Digest, Vol 30, Issue 31
**************************************
More information about the 600MRG
mailing list