[600MRG] 600MRG Digest, Vol 71, Issue 6

[Dave Riley]

GPSDO continued


There are lots of ways to receive 10 mhz from GPS receivers... It didn't 
cost much for this SpectraCom NetClock GPS with 24/7 monitor of the GPS 
sats with BNC outputs at the rear of the 1 x 19" case with 1 hz. and 10 
mhz. out to the -12th accuracy and also an rs232 port for other tinkering...

Been using this 'clock' for years now with never a failure and it has 
run mixers and transverters from 17.2 kc. up to 10ghz...

It just makes timing so simple @ around 100 bux for network pulls...
Poke around e-bay, there are plenty of options...

Then add an Icom 706 with ultimate vxco and sma plug and play modules 
and you're always within a hz or so...

Life is easy in the slow lane... www.radiocom.net/600M/TxVerter2.jpg

Tnx from DaveR /17  , am now the qrp station with the big loop...