[600MRG] Advice requested - weatherproof box for loading coil.

[Drax Felton]

Rubbermaid outdoor trash can.






-----Original Message-----
From: 600MRG [mailto:600mrg-bounces at w7ekb.com] On Behalf Of Edward R Cole
Sent: Saturday, September 3, 2016 5:04 PM
To: Kenneth G. Gordon <kgordon2006 at frontier.com>; 600MRG <600mrg at w7ekb.com>
Subject: Re: [600MRG] Advice requested - weatherproof box for loading coil.

My coil is 10-inch diam by 11-inch long.  I mounted it inside a 3-ft high
box made of plywood.

I will try to get my new synth boards installed in my K3 to enable use at
472-479 and retune the inverted-L after repairing and restringing it.
Should be QRV by snow time.

73, Ed - KL7UW

At 12:24 PM 9/3/2016, Kenneth G. Gordon wrote:
>Thanks for the advice, Folks.
>
>I think the first order of business here is to finish building my 
>remote system, then see what sort of enclosure I will need.
>
>I am thinking at this point that a big NEMA enclosure might be good.
>
>Later....I've got lots of work to do now.
>
>Ken W7EKB
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>
>_______________________________________________
>600MRG mailing list
>600MRG at w7ekb.com
>http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com

73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     dubususa at gmail.com


_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com