[600MRG] WD2XSH/12 CW beacon loud this morning
Michael Mussler
mmussler at wispertel.net
Fri May 13 07:30:09 CDT 2016
Thanks for “being there” and for the nice report John! I activated the WD2XSH/12 CW beacon ahead of the Rocky Mountain Division HamCon this weekend. I plan to do a 630m demo following my 630m presentation If I can find a quiet spot someplace outside the convention center. I’ll leave the beacon running through Saturday evening.
73,
Mike
AI8Z
WD2XSH/12
> On May 13, 2016, at 5:14 AM, John Langridge <kb5njd at gmail.com> wrote:
>
> Mike, XSH12 was loud (S7) this morning as I was prepping for my weekday
> morning CW sked on 474.5 at 1030z. It was dumb luck that I heard him,
> however, because the station I have a sked with is to my SE and is best
> heard on the bi-directional multiturn resonant loop where the reciprocal
> path happens to be towards Colorado.
>
> Nice to hear another QRV late season CW station. I was hoping Mike might
> have been in the shack and I did call him a few times between breaks but
> sounds like he was just running the beacon.
>
> I usually hang around for a few minutes after the sked ends at 1100z to see
> if anyone else is around and check a variety of directions. Please jump in
> and say hi if you hear us and make long calls because it usually takes a
> minutes to cycle through the antennas.
>
> 73!
>
> John KB5NJD / WG2XIQ..
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
More information about the 600MRG
mailing list