[600MRG] ebay variometer?

[Brian Pease]

It looks like the same motor that is on the 6RPM gearhead motor on my 
Vac Variable.  It only draws about 35mA turning the cap, which is fairly 
stiff in one direction.  Full load would be >100mA.  With 0.6RPM 
gearing, you should be able to (slowly) twist bolt heads off!

Too bad you won't have cake any 
more........................................................

On 12/31/2016 7:20 PM, Paul Signorelli wrote:
> That is the motor that I am using.
>
> <http://www.ebay.com/itm/311726860791?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT>
>
>
> Notice that this is a very small motor.
>
> If your vari-coil is 50 turns wound on a 5 gallon bucket, this one won't turn it.
>
> My coil is only about 12 turns of #10 wire on my XYL's Tupperware cake dish, 9 inches in diameter.
>
> Very light weight.
>
> Paul  wa2xrm
>
>
> ________________________________
> From: 600MRG <600mrg-bounces at w7ekb.com> on behalf of John Molnar <wa3etd at gmail.com>
> Sent: Saturday, December 31, 2016 5:10 PM
> To: lstoskopf at cox.net
> Cc: 600MRG
> Subject: Re: [600MRG] ebay variometer?
>
> Here ya go:
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>