[600MRG] RW Beacon on 480 kHz +/- 0.5,

[Paul Signorelli]

If anyone has QRM around the RW Beacon frequency, 480 kHz,
i can move around +/- 500 Hz for your reception convenience.
Just let me know where your clear frequency is.
The Beacon is not on the air all the time.
let me know when you want to listen and i will power it up.
Paul  wa2xrm
 
From: n6lf at epud.net
To: w0rw1 at msn.com
Subject: RE: [600MRG] RW Beacon on 480 kHz, 29 Dec. 14,
Date: Wed, 7 Jan 2015 10:02:11 -0800

Hi Paul, I’ve looked for your signal but no joy.  Using Sprectran or ARGO I see a continuous signal almost on your frequency.  It has some modulation I don’t recognize about 20 Hz wide right on 480 kHz and there are two sidebands + and – 110Hz with no apparent modulation but the sidebands turn off periodically for a few minutes and then turn back on.  While the sidebands are off the central modulation continues.  The sidebands are much stronger than the central modulation.   I’ll keep looking but I’m afraid you’re being QRM’d.  73, Rudy N6LF WD2XSH/20