[600MRG] RAKs and such - ballast tube.
Kenneth G. Gordon
kgordon2006 at frontier.com
Mon Nov 3 14:27:25 CST 2014
On 3 Nov 2014 at 14:59, Bill Cromwell wrote:
> Hi Rudy,
>
> My RAK is all original AND I use the original power supply. We can pull
> the ballast tube out of those (unless we are going into naval combat).
> That leaves a pretty much standard B+ with a voltage regulator - two of
> the three original tubes. You just unplug that ballast tube pull it and store it
> someplace 'safe'.
Ha! Youse guys... (shakes head...)
You don't have to remove that ballast tube: there is a switch down at the
bottom, inside, that simply turns it off. That way you can "store" the ballast
tube in the power supply.
Ken W7EKB
More information about the 600MRG
mailing list