[600MRG] WSPR Grabber and notes

[Neil Klagge]

Looks like that might be XXM on the grabber now.
Neil


On Thu, Jan 23, 2014 at 4:40 PM, Andy - KU4XR <ku4xr at yahoo.com> wrote:

> Hi all:
>
> WSPR Grabber
>
> I'll have the 630 meter WSPR grabber running again tonite.. I configured
> Spec Lab
> a bit, and made the window noticably larger.. and hopefully easier to read
> frequency..
> There is a small trade-off though.. The waterfall will look just a little
> bit grainy.. That
> shouldn't be a problem though with anyone..
>
> http://lwca.org/grabbers/ku4xr/
>
> Notes
>
> After quite a few days of intermittent drop-outs in my receive, and lower
> than normal
> noise levels; I found a problem.. After checking coax jumpers and various
> connectors,
> it turned out to be a wire broken loose on a winding of my 9 to 1
> transformer that I use
> for receive.. That is now fixed, and the receive seems to be back to
> normal now..
> I was beginning to think my radio was going down.. Barring crudy band
> conditions tonite,
> I hope to hear better now..
>
> 73 to all, and good DX to you:
>
> Andy - KU4XR
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>



-- 
*"I use the original form of social networking, Amateur Radio." *
              *(my ham radio site is at 'w0yse.webs.com
<http://w0yse.webs.com>' )*