[600MRG] New digital station converter/GPSDO testing - JT9 and GMSK starting at 0230z

[John Langridge]

Change:  XSV has indicated he is calling CQ on 1200 Hz JT9 so I will slide down to 1100 for JT9 and any GMSK 15.625.

73,

John XIQ



________________________________
 From: John Langridge <jlangridge at sbcglobal.net>
To: "600mrg at w7ekb.com" <600mrg at w7ekb.com> 
Sent: Wednesday, February 26, 2014 8:08 PM
Subject: [600MRG] New digital station converter/GPSDO testing - JT9 and GMSK starting at 0230z
 

Good evening.

I am breaking in a new MF Solutions transmit downconverter board with the 10 Mhz option after procuring a GPSDO for my digital station.  Thanks to both XJM and XKA for help in getting setup and for providing the hardware to make it happen.  Also thanks to the guys in OK (XXM, KF5JIA, and W5COV) for listening for the better part of the day as I watch the frequency settle in and determine just how far off freq the oscillator in the driver rig actually is.  Much appreciated.

At 0230z, I am planning on doing a little JT9 on 474.2 dial freq, about 1200 Hz carrier.  I may try some GMSK 15.625 after a few rounds of JT9, also around 1200 Hz with 474.2 dial freq.  Its a little noisy tonight so likely no CW CQing after that unless the usual suspects are particularly loud.

WSPR2 for the balance of the night after that.


Reports and QSO's are appreciated!

73,

John WG2XIQ/KB5NJD
_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com