[600MRG] CQ MSK-HELL, 31 baud, Async, 474.2 @ 1000 Hz for a bit this afternoon de WG2XIQ
Charlie , W5COV
cvest at cox.net
Sat Feb 22 14:40:17 CST 2014
I have it up and running , "I THINK". Haven't used it before, but did a
quick setup with the parameters that you posted. Now I will go back and
read the instructions. <grin>
Will report if I see anything and see about getting a screen capture IF
I am successful.
Charlie, W5COV
On 2/22/2014 1:32 PM, John Langridge wrote:
> Good afternoon -
>
>
> For the guys within ground wave range of North Central Texas, I am playing with MSK-HELL at 31 baud, ASYNC mode,at the default 1000 Hz carried on 474.2 KHz dial freq.
>
> I have no idea what to expect, if anything at all. The specs say I don't need to be linear, it fits within my band requirements, and it is reported good to -18 db S/N.. I guess we will see.
>
> This is one of the ZL software packages. You can find it at http://www.qsl.net/zl1bpu/HELL/MSK/LF_mskhell.htm
>
> Reports appreciated.
>
> 73,
>
> John XIQ
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>
More information about the 600MRG
mailing list