[600MRG] signals at WD2XSH/20

[Charlie , W5COV]

John, I was having the same issue as Jay and now Rudy and your tip was 
right on the money. I switched the sound card selection and made several 
JT9 decodes after that, for my first time ever.

Charlie, W5COV


On 2/16/2014 9:05 PM, John Langridge wrote:
> Rudy,
>
> you may be experiencing the same problem that Jay was yesterday which may be the same problem I was experiencing a year ago with the JT9 software.  Check your sound card drivers from the program preferences.  While I could see signals in the waterfall, I had no decodes and transmitting caused a stuttering of the audio.  That was with the windows default selected.  it also happened with the specific driver for my sound card.  I had to select a "DirectX" driver that was listed for the program to rx and tx normally. I presume that driver was included with the software package but admit that I have not checked.  Hopefully that will solve your problem.
>
> 73!
>
> John XIQ
>
>
>
>
> ________________________________
>   From: Rudy Severns <n6lf at epud.net>
> To: 600MRG <600mrg at w7ekb.com>
> Sent: Sunday, February 16, 2014 8:59 PM
> Subject: [600MRG] signals at WD2XSH/20
>   
>
> I'm getting multiple WSPR station decodes since I flipped the switch at
> 0230Z.  That's pretty early, we should have a good night.
>
> Last night I fired up JT9 and had at least two signals on the waterfall but
> no decodes.  Any suggestions???  I'm using XP.  So far tonight no JT9
> signals seen.
>
> We should all be thankful for the work Ken does in providing this reflector. A PITA indeed!
>
> 73, Rudy
>
>
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>