[600MRG] Coil tap clip
Merv Schweigert
k9fd at flex.com
Sun Dec 14 16:24:00 CST 2014
Probably, but have the variometer and its plenty large enough,
just needs a tap clip.
Save the 10KW rollers for an amp that only needs to tune 160-10.
Merv
> Could you put a wound coil in series with one of the roller coils to
> get enough adjustment for 600?
>
> --------
>
>
> Bill Isakson AC6QV
> Roseburg, Oregon USA
> bill.isakson at gmail.com <mailto:bill.isakson at gmail.com>
>
>
>
> On Sat, Dec 13, 2014 at 5:26 PM, Merv Schweigert <k9fd at flex.com
> <mailto:k9fd at flex.com>> wrote:
>
> Right Bill,
>
> The coil is from some very large LF gear, its actually a variac,
> 8 inch diameter and
> 14 inch log. wound with 1/4 inch plated copper ribbon. has a
> large variable coil
> inside, close to one end with a shaft to turn it of course.
> Need to tap the coil to resonate my 160 meter vertical on 475KHZ.
> and a tap to feed
> power to the coil up from the ground end.
> Have some roller coils good for many many KW but they are not
> large enough inductance
> wise.
>
> Years back would sure liked to have had a bag full of the coil
> clips for antenna tuners
> and open wire line I was using.
> Merv
>
>
> Hi Merv,
>
> I have seen those "ribbon wire" inductors. The clips I have
> (even if they were available) would be like a chihuahua dog
> (tea cup size) biting a full size, salt water crocodile! It
> probably would hang on very long. But it's still good to know
> where I can get the clips.
>
> 73,
>
> Bill KU8H
>
>
>
> On 12/13/2014 07:28 PM, Merv Schweigert wrote:
>
> Yes see the coil clip from B&W, for coil stock, nice,
> Need a larger one for flat ribbon stock, more like a
> 10 amp or larger current size one.
> Old broadcast gear had them ..
> Merv
>
>
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com <mailto:600MRG at w7ekb.com>
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>
>
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com <mailto:600MRG at w7ekb.com>
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>
More information about the 600MRG
mailing list