[600MRG] WD2XSH/20

[John Langridge]

Good signal tonight Rudy. Armchair copy as I type this.

I think 477 is quieter than what Eric is contending with on 474.

73 and good luck with the noise!

John XIQ



________________________________
 From: Rudy Severns <n6lf at arrl.net>
To: 600MRG <600mrg at w7ekb.com> 
Sent: Friday, November 1, 2013 5:49 PM
Subject: [600MRG] WD2XSH/20
 

I expect my CW beacon to be on again this evening by 0200Z, 477 kHz.  Should run until about 0500Z.

Have been hard at work on noise problems here.  I modified the MFJ1026 as suggested and it now works at 475 kHz and I could null some of the signals but no help at all for the hash.   I'm using my 160m vertical for the noise sense antenna.

Over the next few days I'm going to install a really good grounding system for the shack.  Right now it's pretty flaky!   And I'll experiment with some common mode chokes.  This battle is going to take a while!

73, Rudy 


_______________________________________________
600MRG mailing list
600MRG at w7ekb.com
http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com