[600MRG] Neil

[Neil Klagge]

Mike, the variometer setting is about 520-580 uH. I have 5 buried radials
now. Three at 30 ft, two at 50 ft.
Two run north, the other three run south. I am unable to run anything E or
W. The house blocks my signal to the east.

73, Neil XSV


On Wed, Dec 4, 2013 at 9:21 PM, Mike.WE0H <we0h at yahoo.com> wrote:

> 44' topless is working fine. How much inductance in that loading coil?
> What do you have for radials? You got me thinkin of a antenna project ;-)
>
> Mike
> /16 ..
>
>
>
>
> Neil K wrote:
>
>> Opps. That 10mW was an old setting that i used a couple of weeks ago. It
>> is
>> actually just a bit above 20mW (ERP)but not close enough to the next level
>> of 50mW in the wspr pgm. Thanks for your report, Ken.
>>
>> And to Mike/16: My vertical is now a whopping 44'1" now....hi. Still no
>> top
>> loading. That will come to pass eventually. I just want to see what I can
>> do "topless" for now, Mike   ;-)
>>
>> My output from the xverter is about 18 watts into the coax.
>>
>> I sure do like the feedback I we get from the wspr program. Joe Taylor is
>> a
>> genius in my book!
>>
>> Thanks for all the decodes...
>> 73, Neil Klagge, wg2xsv
>>
>
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
>



-- 
*"I use the original form of social networking, Amateur Radio." *
              *(my ham radio site is at 'w0yse.webs.com
<http://w0yse.webs.com>' )*