[600MRG] MF Vertical Wire Loop
Dave Riley
dave.riley3 at verizon.net
Tue Nov 14 13:40:50 CST 2017
*This transmitting loop has been up in the air here for about eight
years or so...*
*1. The loop consists of ONE piece or wire and ONE variable capacitor,
that's it...
**The high voltage wire is el-cheapo on e-bay search;
"Professional Electric Underground Dog Fence Wire 14 16 18 gauge
500/1000/1500"
Is very high voltage insulated wire and has 9 strands of copper in the
various sizes...*
*2. This loop tunes from well below 15khz. ( SAQ ) on up to HF... You
will need a decade box or other capacitor in parallel with the variable
cap in order to tune _way down_ below to VLF...
*
*Here is simplified pix with plenty of space to make notes:
http://www.radiocom.net/600M/Loop2017a.jpg*
*Determine parameters of loop from this web page:
Tells you everything you want to know...
http://www.66pacific.com/calculators/small-transmitting-loop-antenna-calculator.aspx*
*It's too easy, requires no radials, coax, relays, etc...
Installs in one hour with poly-rope..*
*The variometer here has 6 turns of HV wire wound over the cold end in
order to couple the TX RFPA final with NO HV DC on the variometer (
safety )..
At the top of the vario is a great spot for an e-probe for 'very fast'
QSK with no relays...
If you don't care about the receive 'pre-select' effect then go wide
band by placing the e-probe placed near the wire of the loop itself...
*
*The bananna jacks at the bottom allow you to insert a toroid
transformer if you like...*
*I will add some 'extras' but first try a loop and see more quiet RX and
higher efficiency RR above poor ground which is most everywhere )...*
*TNX from DaveR AA1A*
More information about the 600MRG
mailing list