[600MRG] The need to transceive
Roger Graves
ve7vv at shaw.ca
Thu Nov 2 12:52:32 CDT 2017
John,
Which amp do you have? I have a 25W one that as supplied requires 500 mW drive, if the 6dB attenuator were removed it would be 250 mW, if the 1:1 input transformer were replaced with a stepup design (mosfets have high input Z on 630) I think it might get down to 25 mW. So you might not need an extra amp stage if your amp is similar.
The SoftRock RXTX uses a 2N2222 for the driver stage, you could look at the schematic of that for ideas and see my mod for a MF/LF transformer design.
http://qsl.net/v/ve7vv//Files/RXTX LF-MF Modification.pdf
73,
Roger
On Nov 2, 2017, at 9:45 AM, John Harper <johnae5x at gmail.com> wrote:
> The transverter output on my Flex is 10-20 mW - the required RF level into
> my 630m amplifier is 150-500 mW.
>
> Does anyone know of a schematic/kit of a low-level amplifier that would be
> suitable for raising the transverter's output to the required level?
>
> --
>
> John AE5X
> https://ae5x.blogspot.com
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
More information about the 600MRG
mailing list