[600MRG] Signal on with no decode

[Laurence KL7 L]

Yep - i dropped down 10Hz  from normal ops to avoid co channel with XIQ - prob just off the edge of the decoder with you Merv. Was chugging out 200W at the beginning  of the night but back to 150W at the end with additional wet foliage/tree losses. We are snowless here and only had 20 in since Oct. 



> On Feb 23, 2015, at 08:44, Merv Schweigert <k9fd at flex.com> wrote:
> 
> Laurence you usually decode just fine, I guess could have been,  was about the
> signal strength that you usually are.   Strange it did not decode.  Checked my
> clock etc to make sure I was in sync..  no joy.
> See what happens tonite.
> 73 Merv
>> Maybe XPQ Merv - I was on 604 +_0.3Hz or so
>> 
>> Heavy rain and 42F here - antennae went a little more capacitive but held up. Overall conditions still only fair to poor looking South and East
>> 
>> Laurence
>> 
>> 
>> 
>>> On Feb 23, 2015, at 08:12, Merv Schweigert <k9fd at flex.com> wrote:
>>> 
>>> Last nite as I checked the WSPR screen just before hitting the rack,
>>> there was a strong signal on "600"  it was in sync with the WSPR
>>> timing,  was plenty strong to decode,  it looked like about -15 but
>>> nothing at all decoded.
>>> I checked the WSPR active page and no one was reporting as being
>>> on 600.    Anyone know who it was, or perhaps it was another mode
>>> in operation?
>>> 
>>> 73 Merv K9FD/KH6  WH2XCR
>>> 
>>> _______________________________________________
>>> 600MRG mailing list
>>> 600MRG at w7ekb.com
>>> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com
> 
> 
> _______________________________________________
> 600MRG mailing list
> 600MRG at w7ekb.com
> http://w7ekb.com/mailman/listinfo/600mrg_w7ekb.com