[600MRG] Connecting to the pill bottle

[Pat Hamel]

When you have drilled the holes for the three number four screws in the
proper pattern in the pill bottle bottom, you take a hack saw and cut small
(3/8) slots in the side of the bottle adjacent to the screws.
Get some of the old LONG solder ground terminals (tin them first) and
whatever tool you use to reach inside things.
Slip the terminal in from the outside and put the screw through it and the
hole in the bottom of the pill bottle.
 The nut goes on the outside to hold it together.
The long terminal will solder to a thin wire quickly, and not melt the
bottle.
It worked for me.
Pat /6