[600MRG] WG2XJM CW Beacon

[Eric NO3M]

John

Thanks for advising on the freq.  The rig is on 473.0 kHz USB, made an 
audio recording at what should be 1000 Hz.  The carrier should end up at 
474 kHz.  Audio recording was made with 'cwtext' in Linux. I'd rather 
run keyed CW, but couln't find a ready application to beacon.  Fldigi 
would have been another option, but TX audio from it is not working for 
some reason as yet to be detemermined.  The CW audio file is just 
getting played back from a shell script every 10 seconds.

73 Eric

On 10/30/2013 07:48 PM, John Andrews wrote:
> Eric,
>
> You're coming in very nicely here on 475.0 kHz (was the 474.0 a 
> typo?). Copying across the room...
>
>